Parts: Ambulatory Infusion Pump

• Complete Systems (77)
• Parts (1)

 

 

 

 

Item Details

Seller details

Item Price (USD)

Year manufactured

153889275

Quick Look

 

Device: Ambulatory Infusion Pump
Manufacturer: Deltec Smiths
Model: CADD PRIZM PCS II 6101
Name / Number: Power Adapter / 21-3815

Location: United States, Vermont

Negotiable

-

The model & manufacturer of the marked items have changed due to an acquisition between companies, and are also known as:

Current Manufacturer / Model Name	Alternative Manufacturer / Model Name
Smiths Medical / CADD PRIZM PCS II 6101	Deltec Smiths / CADD PRIZM PCS II 6101

Ambulatory Infusion Pump may also be referred to as :

Volumetric Infusion Pump | Peristaltic Infusion Pump | Infusion Pump | Ambulatory Infusion Pump | Infusion Pump, Ambulatory

Tips for buying Ambulatory Infusion Pump Parts

1. Ambulatory Infusion Pumps are used to deliver parenteral agents from syringes or collapsible bags. Their size should be small enough so that patients can comfortably wear or carry them. During sleep they should not disturb the patient, and during daily use they should not be conspicuous.
2. Medical facilities should carefully select patients to ensure successful insulin infusion therapy. The patients should be motivated and mature with a history of good compliance with insulin therapy.
3. All pumps should be able to run for at least 72 hours without draining the reservoir or depleting the batteries. Pumps should have a flow range of <=0.5 to >=100 mL/hr and maintain a flow accuracy of 5%. Ambulatory infusion pumps should be capable of operating in a continuous infusion mode, though it is desirable for pumps to offer additional modes. In a Peristaltic pump, a set of rollers pinches down on a length of flexible tubing, pushing fluid forward.
4. Luer-lock fittings or integral tubing, distal air filters, and air-in line detectors may be used as protection methods against air embolism in ambulatory infusion, ambulatory insulin pumps and peristaltic infusion pumps that can deliver from an external reservoir.
5. Volumetric Infusion Pumps should detect an upstream occlusion and suspend infusion when downstream pressure is >=10 psi. The bolus volume released after an occlusion is cleared should be 0.5 mL.
6. Volumetric Infusion Pumps can be utilized for continuous or intermittent delivery through clinically acceptable routes of administration such as, intravenous (IV), intra-arterial (IA), subcutaneous, epidural, or irrigation of fluid spaces applications
7. Free flow protection should be part of any ambulatory and ambulatory infusion pump. Audible alarms should sound for all conditions that might interrupt infusion, including: high pressure/occlusion, low or depleted battery, reservoir-side obstruction, pump malfunction, air in line, and empty or near empty reservoir.
8. Ambulatory Infusion Pump alarm volumes should be adjustable with settings loud enough for critical alarms and soft enough for social situations. The pumps should have data logs that can store up to 200 events including volume delivered, program settings, error codes, alarms, and rate.
9. Display screens in ambulatory insulin infusion pumps, volumetric infusion pumps and peristaltic infusion pumps should be clear and easy to read and should indicate time, basal rate, bolus dose, and accumulated dose.
10. All ambulatory insulin infusion pumps offered should be able to deliver basal flows of 5 to 100 U/day with a resolution of 2 U/day. The recommended ones are those with a bolus dose range of <=0.5 to >=25 U/bolus with a resolution of <=0.5 units.