MedWOW / Medical Equipment / Laboratory Equipment / Chemistry Analyzers, Automated / Olympus / AU400
Used Chemistry Analyzers, Automated - Olympus - AU400
Item 682486867
Are you the Seller of this medical device/part? Log In for more options.








Status: | Open |
Item type: | Complete System |
Category: | Laboratory |
Device: | Chemistry Analyzers, Automated |
Manufacturer: | Olympus |
Model: | AU400 |
Condition: | As is |
Year manufactured: | 2010 (Estimated year) |
Location: | Czech Republic, Praha |
Availability: | Immediate |
Quantity: | 1 available |
Unit Price: | 12042.3 9,800.00 EUR/ 12,042.27 USD |
Comments: | Price is ex our warehouse, without transport, taxes, crating. Immediately available. The transport can be managed for extra fee. Ask us for quotation according your location. Price is negotiable. CONTACT US !!! |
|
|
![]() | Contact the Seller | ![]() |
![]() | Inspect Before You Buy | ![]() |
Item Description
Olympus AU 400 ISE
Fully automated clinical chemistry analyser
In exellent working condition.
The analyser has been checked by authorized service technician.
Over 80 tests available including Substrates, Enzymes, Specific Proteins, DAU, TDM and Homogeneous Immuno Assays
Located in the Czech Republic. CE marked
SPECIFICATIONS:
- Analytical system: Fully automated, for routine, STAT, urine and homogeneous Immuno Assays
- Analytical methods: Clinical chemistry and immunological parameters. End point, kinetic assays, fixed-time-kinetics,
optionally ISE
- Simutaneously processed analytes: Up to 51 photometric tests
+ 3 ISE
- Throughput: 400 photometric tests/hour; maximum of 800 with ISE
- Sample feeder: Racks with 10 samples each (barcodes on primary tubes and on racks); capacity of 80 samples; continuous loading
- Sample Tubes: In primary and secondary tubes; diameter from 11.5 to 16 mm; height from 55 to 102 mm
- STAT samples: Up to 22 positions for STAT samples, bar-coded primary tubes
ample volume: 2-50 μl in 1 μl steps (1-50 μl for repeats)
- Reagent supply: Refrigerated (4 °C-12 °C); 76 positions for R1/ R2
- Reagent volume: 1. reagent: 25-300 μl; 2. reagent: 25-300 μl; (in 1 μl steps)
- Total reaction volume: 150-550 μl
- Reaction cuvette: Quartz cuvettes
- Reaction time: Up to 8 minutes, 40 seconds
- Reaction temperature: 37 °C
- Mixing method: With rotating paddles after dispensing sample and reagent
- Photometry system: Direct assay through the reaction cuvette (0-2.5 OD) mono-, bichromatic measurements possible
- Wavelength: 13 different wavelengths between 340-800 nm
- Cuvette cleaning: Comprehensive cleaning with detergents
- Calibration - Linear and non linear (linear interpolation), refrigerated calibrator positions
- Data processing - Calculated parameters, blank value correction and correlation. Definition of normal value range, measuring range, pathological values and repeats. Quality controls, printout of abnormal values, pending samplework list and repeat run sample list
- Test requisition: Individual and profile test requisition via on-line, mouse, function keys or optional touch screen
- Safety: Clot detection and crash prevention for sample and reagent dispenser
- Software: Windows-NT®
- On-line: Full uni- and bidirectional communication possible
Fully automated clinical chemistry analyser
In exellent working condition.
The analyser has been checked by authorized service technician.
Over 80 tests available including Substrates, Enzymes, Specific Proteins, DAU, TDM and Homogeneous Immuno Assays
Located in the Czech Republic. CE marked
SPECIFICATIONS:
- Analytical system: Fully automated, for routine, STAT, urine and homogeneous Immuno Assays
- Analytical methods: Clinical chemistry and immunological parameters. End point, kinetic assays, fixed-time-kinetics,
optionally ISE
- Simutaneously processed analytes: Up to 51 photometric tests
+ 3 ISE
- Throughput: 400 photometric tests/hour; maximum of 800 with ISE
- Sample feeder: Racks with 10 samples each (barcodes on primary tubes and on racks); capacity of 80 samples; continuous loading
- Sample Tubes: In primary and secondary tubes; diameter from 11.5 to 16 mm; height from 55 to 102 mm
- STAT samples: Up to 22 positions for STAT samples, bar-coded primary tubes
ample volume: 2-50 μl in 1 μl steps (1-50 μl for repeats)
- Reagent supply: Refrigerated (4 °C-12 °C); 76 positions for R1/ R2
- Reagent volume: 1. reagent: 25-300 μl; 2. reagent: 25-300 μl; (in 1 μl steps)
- Total reaction volume: 150-550 μl
- Reaction cuvette: Quartz cuvettes
- Reaction time: Up to 8 minutes, 40 seconds
- Reaction temperature: 37 °C
- Mixing method: With rotating paddles after dispensing sample and reagent
- Photometry system: Direct assay through the reaction cuvette (0-2.5 OD) mono-, bichromatic measurements possible
- Wavelength: 13 different wavelengths between 340-800 nm
- Cuvette cleaning: Comprehensive cleaning with detergents
- Calibration - Linear and non linear (linear interpolation), refrigerated calibrator positions
- Data processing - Calculated parameters, blank value correction and correlation. Definition of normal value range, measuring range, pathological values and repeats. Quality controls, printout of abnormal values, pending samplework list and repeat run sample list
- Test requisition: Individual and profile test requisition via on-line, mouse, function keys or optional touch screen
- Safety: Clot detection and crash prevention for sample and reagent dispenser
- Software: Windows-NT®
- On-line: Full uni- and bidirectional communication possible
Questions and Answers Regarding this Item ![]() |
Question | Answer |
General: Did the device perform according to manufacturer specifications just before dismantling? | Awaiting Confirmation |
General: Is the device under confiscation? | Awaiting Confirmation |
General: Is the device mortgaged? | Awaiting Confirmation |
General: Is the refurbishing process accomplished by the original manufacturer or its authorized agent? | Awaiting Confirmation |
General: Frequency | Awaiting Confirmation |
General: Is the device still installed? | Awaiting Confirmation |
General: What is the date of refurbishing? | Awaiting Confirmation |
General: Are you the owner of the device? | Awaiting Confirmation |
General: Are there any visual or non visual damages? | Awaiting Confirmation |
General: Power supply - phase | Awaiting Confirmation |
General: Power supply - Volts range | Awaiting Confirmation |
General: Does the price include system crating? | Awaiting Confirmation |
General: Hardware / Software? | Awaiting Confirmation |
General: What is the date of manufacturing? | Awaiting Confirmation |
General: What is the estimated size of the needed package? | Awaiting Confirmation |
General: If applicable - When was it de-installed and stored? | Awaiting Confirmation |
General: Is this system / equipment fully approved by the FDA ? | Awaiting Confirmation |
General: Is this system / equipment CE marked? | Awaiting Confirmation |
Manuals & Documentation: Is there an operation manual? | Awaiting Confirmation |
Manuals & Documentation: Are there purchasing documents of the device? | Awaiting Confirmation |
Manuals & Documentation: Does it have all labels according to manufacturer's specification? | Awaiting Confirmation |
Manuals & Documentation: Is there a calibration and adjustment file? | Awaiting Confirmation |
Manuals & Documentation: Is there a CCF - Customer Complaints File? | Awaiting Confirmation |
Manuals & Documentation: Is there a maintenance service logbook? | Awaiting Confirmation |
Manuals & Documentation: Is there a log of repair parts? | Awaiting Confirmation |
Service & Warranty: Can you provide service and application support for this Device? | Awaiting Confirmation |
Service & Warranty: Was the system under T & M service? | Awaiting Confirmation |
Service & Warranty: Was the service given by the manufacturer? | Awaiting Confirmation |
Service & Warranty: Was the service given by third party? | Awaiting Confirmation |
Service & Warranty: Is there a warranty period after installation? | Awaiting Confirmation |
Terms of payment: Do you agree to trade in? | Awaiting Confirmation |
Sale Information
Payment
Packaging
Payment methods:
Bank Transfer
Advance payment percentage: 100%
The item is not packed
Inspection
Seller allows inspection of item? Yes
Available for inspection from: Immediate
|
All item information on this page has been supplied by seller and MedWOW cannot guarantee its accuracy.
Didn't find the medical device you're looking for? Post a Buying Request
A buying lead is an excellent way to reach worldwide medical equipment sellers!
- Fill in a simple form, giving us details about the medical device you are searching for.
- Receive competitive quotes from global sellers that have the item you are searching for in their inventory.
- Choose the best and most suitable quote for you!
View more Chemistry Analyzers, Automated devices for sale



Seller details
Location: Czech Republic, Ustecky
Business type: Dealer
Seller's language(s): English, Czech
Learn More About This Seller
![]() | Get a D&B Report >> |
Buying Toolbox
Track this Item
Required Quantity

Quantity available: 1
Please enter the quantity you would like to purchase:
Quantity must be between 1 - 1
Please select your choice
Popular Searches
Use of this website constitutes acceptance of the MedWOW User Agreement and Privacy Policy.
© 2014 All rights reserved, MedWOW Ltd. Global online marketplace for buying and selling used medical equipment and medical equipment parts.
***