A
B
Bench Power Supply
A power supply used for various technical purposes.
Bio Impedance Measurement
Various devices and equipment based on electrical measurements, which are performed with the aid of surface electrodes or volume electrodes.
C
Counter / Electronic Test Equipment
An instrument intended mainly for technical use during measurement and calibration of medical and other equipment.
Cytometer
Devices intended to measure the number of cells (particles) in a flow of suspension. Detection is done either by electrical methods, or by an optical system (e.g. laser system).
D
Defibrillator Tester
Testing instrument to evaluate the proper function of external manually operated defibrillators and cardioverters, semi automated and automated defibrillators.
Digital Voltmeter (DVM)
A basic measuring instrument for determination of various electrical parameters such as DC voltage, AC voltage, DC current, AC current, electrical resistance etc.
E
ECG Tester
Device which generates electrical signals that simulate human ECG. This signal is used to check the proper response of ECG recorders and monitors.
Electrical Generator
A high power AC generator to support the main functions of the hospital during power failures.
Electrical Safety Analyzer
An instrument intended to check the electrical safety of the line input power circuit of medical equipment.
Electronic Laboratory Oscilloscope
An oscilloscope used for technical purposes by technicians and engineers for viewing signal voltages.
Endoscope Tester
Equipment which enables testing and evaluating the performance of endoscopic equipment, mainly the endoscopes. For example a special pump which is intended to detect air and water leakages in channels of the endoscope.
Environmental Test Equipment
Equipment intended for the measurement of various parameters associated with the environment.
External Pacemaker Tester
A device which analyzes the output of external pacemakers.
H
Human Anatomy Model
Human Anatomy Models for teaching and training purposes, as well as patient education.
I
Image Intensifier
A device which converts X-ray patterns into a visible image (Analogue).
Infusion Pump Analyzer
A device which analyzes and tests infusion pumps, mainly the flow volume.
Isolation Transformer
Line operated transformers used for separating medical equipment from the line potentials. Feature a very low line current leakage.
L
Laser Tester
Various devices and instruments for testing or evaluating the function of medical lasers.
Line Regulator
Electrical devices which are connected between the power supplying system and the equipment, intended to provide the proper voltage amps (transformers) and to protect the input electrical system of the equipment.
Liquids Conductivity Meter
A device to measure the conductivity of water or other polarized liquids.
M
N
NIBP Simulator
Device which enables testing and calibrating of NIBP meters and monitors.
N (Continued...)
Nitrogen Generator
A system which separates Nitrogen from other gases and purifies it according to necessary degree.
P
Pacemaker Tester
An external controller, programmer or tester which can govern the major parameters of pacemakers and retrieve reported information by the pacemaker.
Package Tester
A device which performs a variety of leak and seal strength tests on flexible, rigid and porous materials. (Mainly against atmospheric contamination).
Phototherapy Radiometer
Instruments designed for the accurate measurement of light radiation in the blue part of the spectrum from 400-480 nanometers. Phototherapy exposure in this range is used in the treatment of hyperbilirubinemia in newborn children.
Pulse Oximeter Tester
An instrument intended to check the calibration of pulse oximeters.
R
S
Safety Eyewear
Eyeware used for protection during laser procedures.
Service Trolley for Linear Accelerators
A mobile high vacuum pump used for Linac maintenance. This pump is used to achieve the primary vacuum in the Linac.
Spectrum Analyzer
Devices used to analyze the spectrum of bioelectrical or medical device signals, and characterize EMI - electromagnetic interference - coming from other equipment or natural sources.
Supplies Boom
Ceiling-mounted devices (booms) for utility and medical device organization.
T
Test Lung
The test lung is special flexible balloon which is intended to be inflated and deflated by the respiration machine under test.
Thermostatic Water Cooler
A device which cools the water down to predetermined temperature and circulates the water through laboratory and other equipment.
Training Manikin
Various training manikins, for CPR training, trauma rescue, defibrillation and other patient treatment skills, tasks and techniques.
U
Ultrasound Meter
Devices intended for checking acoustic and electrical parameters and correct power level delivery by ultrasound equipment and transducers.
Ultrasound, Training
Simulation based ultrasound training systems.
Uninterruptible Power Supply
An uninterruptible power supply provides emergency power and line regulation to connected equipment by supplying power from a separate source, typically for 5–15 minutes until an auxiliary power supply can be turned on, utility power restored, or equipment safely shut down.
V
Vacuum Pump
Electrical pumps in various output capacities and various vacuum pressure ranges.
Vascular Laboratory
Integrated equipment for studies of the blood flow.
Ventilator Analyzer
This system is intended for checking and calibrating of respirators and ventilators.
Voice Recognition Control Center
A system intended for accepting voice commands and executing various standard functions in the operating room.
Voice Recorder
Digital system for dictating and transcribing medical reports and records.
X
