New & Used CO2 Monitor

Market Value Calculator
 
Please Note: Search results for this device do not include the following devices, please select the relevant device if it is of interest to you: Breathing Monitor
 
 
 
 
Item Details
Seller details
Item Price (USD)
Year manufactured

Quick Look

 
Device: Patient Monitor
Manufacturer: Invivo
Model: Magnitude 3150M MRI
Location: Australia, Queensland
7,499
2005

Quick Look

 
Device: CO2 Monitor
Manufacturer: Hewlett Packard
Model: 78354C
Location: Germany, Berlin
Negotiable
-

Quick Look

 
Device: Patient Monitor
Manufacturer: Criticare
Model: Poet Plus 8100
Location: United States, Texas
2,195
-

Quick Look

 
Device: Patient Monitor
Manufacturer: Criticare
Model: Poet Plus 8100
Location: United States, Texas
2,195
-

Quick Look

 
Device: CO2 Monitor
Manufacturer: SenTec
Model: SDMS
Location: Germany, Bavaria
Rating: 93%
1,635
-

Quick Look

 
Device: CO2 Monitor
Manufacturer: Esaote
Model: Mainstream CO2 Module
Location: United States, Minnesota
Rating: 92%
Negotiable
-

Quick Look

 
Device: CO2 Monitor
Manufacturer: Esaote
Model: Mainstream CO2 Module
Location: United States, Minnesota
Rating: 92%
Negotiable
-
Page: 1 2 3 4 5
The model & manufacturer of the marked items have changed due to an acquisition between companies, and are also known as:
Current Manufacturer / Model Name Alternative Manufacturer / Model Name
Datex-Ohmeda GE Healthcare / CAPNOMAC ULTIMA Ohmeda (GE Healthcare) / CAPNOMAC ULTIMA
GE Healthcare / CAPNOMAC ULTIMA Ohmeda (GE Healthcare) / CAPNOMAC ULTIMA
Datex-Ohmeda GE Healthcare / Normocap Oxy Ohmeda (GE Healthcare) / Normocap oxy
GE Healthcare / CAPNOMAC ULTIMA Datex-Ohmeda GE Healthcare / CAPNOMAC ULTIMA
Datex-Ohmeda GE Healthcare / RGM 5250 Ohmeda (GE Healthcare) / RGM 5250
Hewlett-Packard / M1026A Anesthetic Gas Module Agilent Philips / M1026A Anesthetic Gas Module
Hewlett-Packard / M1026A Anesthetic Gas Module Philips / M1026A Anesthetic Gas Module

CO2 Monitor may also be referred to as :

Carbon Dioxide Monitor, End-Tidal | Carbon Dioxide Monitor, Exhaled Gas | Exhaled Carbon Dioxide Monitor | Operating Room Monitor | OR Monitor | Ventilation Alarm | Carbon Dioxide Analyzer, End-Tidal | Capnometer | Capnocheck | Capno Check | Breathing Circuit Monitor | Breathing Circuit Alarm | Alarm, Ventilation | Carbon Dioxide Monitor
 

Tips for buying CO2 Monitor

  1. The measurement range of these CO2 monitor units should be at least 0 to 76 mm Hg. Carbon dioxide room monitors should be accurate to within 10% of the actual concentration.
  2. To ensure that the CO2 monitor remains within the optimal accuracy, interference with CO2 measurements by other gases should be eliminated or automatically compensated for by the CO2 monitor.
  3. Water vapor, aspirated fluid, or pressure in the breathing circuit can all cause interference. The presence of CO2 should be detected by the carbon dioxide monitor within 30 sec of being turned on.
  4. Exhaust gas from the operating room monitors must be returned to the patient's breathing circuit or scavenged. When gas is to be scavenged, an easy-to-access port - to which the sampling tube can be connected, should be provided with the CO2 monitor. 
  5. To connect the exhaust port to the expiratory breathing circuit or a scavenger, tubing with the appropriate fittings should be provided by the operating room monitor manufacturer.
  6. CO2 monitors should have adjustable alarm limits for high and low ETCO2, high inspired CO2, and high and low respiration rates for continuous monitoring. When alarm limits are not active, "alarms off" indicator should be available.
  7. Alarm limits should initialize to useful default values once the CO2 monitor is turned on. Visual alarms could not be disabled. If the alarm condition is not corrected, the alarm must recur automatically after a short period of time. However, an audible-alarm silence is acceptable.
Read more valuable tips on the Medical Equipment Buying Guide by MedWOW >>