New & Used Daylight Film Processor, Kodak

Market Value Calculator
 
Applied Filters

Manufacturer : Kodak

  Reset
 
 
 
 
Item Details
Seller details
Item Price (USD)
Year manufactured
Daylight Film Processor X-OMAT 5000 RA 172455 - MedWOW

661475495

Quick Look

 
Device: Daylight Film Processor
Manufacturer: Kodak
Model: X-OMAT 5000 RA
Location: Germany, Hamburg
2,384
-
Daylight Film Processor X-Omatic 2 ID Camera 164869 - MedWOW

638841273

Quick Look

 
Device: Daylight Film Processor
Manufacturer: Kodak
Model: X-Omatic 2 ID Camera
Location: United States, Minnesota
Rating: 92%
Negotiable
-
Daylight Film Processor X-Omatic 2 ID Camera 164871 - MedWOW

261036085

Quick Look

 
Device: Daylight Film Processor
Manufacturer: Kodak
Model: X-Omatic 2 ID Camera
Location: United States, Minnesota
Rating: 92%
Negotiable
-
Daylight Film Processor RP X-OMAT M6B 92912 - MedWOW

544144374

Quick Look

 
Device: Daylight Film Processor
Manufacturer: Kodak
Model: RP X-OMAT M6B
Location: United States, Minnesota
Negotiable
This Seller accepts SafeTrade as a payment method
-
Daylight Film Processor X-OMAT Multiloader 300 86508 - MedWOW

5103903469

Quick Look

 
Device: Daylight Film Processor
Manufacturer: Kodak
Model: X-OMAT Multiloader 300
Location: United States, California
Rating: 60%
2,500
-
Page: 1 2 3

Daylight Film Processor may also be referred to as :

X-ray Film Handling Equipment, Automatic, Daylight | X-ray Film Processor | X-ray Film Loader | Daylight Film System | X-ray Film Daylight Processor
 

Tips for buying Daylight Film Processor

  1. Medical facilities should look into the compatibility of the new Daylight Film Processor they are about to purchase with existing equipment, such as film cassettes.
  2. The location of the system and the type of x-ray film daylight processor to be attached are also important considerations when selecting the appropriate system.
  3. Daylight x-ray film handling equipment is still used widely because it eliminates the need for a darkroom.
  4. Daylight film processors shorten x-ray processing time since they automatically load empty cassettes with fresh film.
  5. Buyers should make sure their x-ray film handling equipment can store at least 20 cassettes in each storage rack and have built-in identification systems.
  6. The processing time for mammography films should be slightly longer. These x-ray film processor units should also have a low-film indicator.
  7. All cassette and film handling functions are performed at one location in centralized systems. Therefore, the area in which they are located can become congested, unless there are enough units to meet the department's needs. Centralized daylight film processor systems must be located immediately next to the x-ray room to get the full benefits of the systems.
  8. Facilities that are trying to cut costs by compromising installation (for example: placing the x-ray film daylight processor equipment in corridors so that several x-ray rooms can share a single installation) are actually diminishing the potential benefits of the system.
  9. The unexposed fresh-film supply magazines used in centralized units must be loaded under darkroom conditions, which takes more darkroom floor space.
  10. Centralized daylight film processor systems can reduce total processing and staff training time. The best location for them is the darkroom. To minimize renovation, users can place them inside an existing darkroom, or next to an outside wall of such room, and use the power supply and plumbing fixtures already in place.
  11. This x-ray film processor installation makes more productive use of darkroom space and personnel and allows for convenient quality control practices.
  12. Usually, modular daylight film processor systems use less floor space and are more easily serviced than centralized systems. Some x-ray film daylight processors do not require a darkroom, greatly reducing new construction or renovation costs.
  13. The department may have to purchase several x-ray film processor to maximize the benefits of a modular system.
  14. Modular daylight film processor systems can be located inside the x-ray examination room, and can be easily integrated into existing departments. They are well suited for dispersed processing applications generally considered to be one x-ray film processor for every two rooms.
Read more valuable tips on the Medical Equipment Buying Guide by MedWOW >>