MedWOW / used medical equipment / Laboratory Equipment / Laboratory Incubator, Thermocycling
 

New & Used Laboratory Incubator, Thermocycling

Market Value Calculator
 
Manf. Year From
Manf. Year Until
Please Note: Search results for this device do not include the following devices, please select the relevant device if it is of interest to you: Laboratory Incubator,Anaerobic Incubator
  • Complete Systems (21)
 
 
 
 
Item Details
Seller details
Item Price (USD)
Year manufactured
Laboratory Incubator, Thermocycling G25 180949 - MedWOW

684912398

Quick Look

 
Device: Laboratory Incubator, Thermocycling
Manufacturer: New Brunswick Scientific
Model: G25
Location: United States, Massachusetts
Rating: 100%
1,300
-
Laboratory Incubator, Thermocycling Tetrad 2 171908 - MedWOW

683958708

Quick Look

 
Device: Laboratory Incubator, Thermocycling
Manufacturer: MJ Research
Model: Tetrad 2
Location: United States, California
12,000
This Seller accepts SafeTrade as a payment method
-
Laboratory Incubator, Thermocycling Touchdown 170678 - MedWOW

816719341

Quick Look

 
Device: Laboratory Incubator, Thermocycling
Manufacturer: Hybaid
Model: Touchdown
Location: United States, California
2,299
This Seller accepts SafeTrade as a payment method
-
Laboratory Incubator, Thermocycling Genius 63277 - MedWOW

754785145

Quick Look

 
Device: Laboratory Incubator, Thermocycling
Manufacturer: Techne
Model: Genius
Location: United States, Virginia
1,071
-
PCR Temptronic D866925 69332 - MedWOW

324230592

Quick Look

 
Device: PCR
Manufacturer: Barnstead Thermolyne
Model: Temptronic D866925
Location: Canada, Ontario
752
-
Page: 1 2

Laboratory Incubator, Thermocycling may also be referred to as :

Thermocycling Laboratory Incubator | Thermocycling Incubator | Thermocycler | Thermal Cycler | Laboratory Hybridiztion Incubator | Hybridization Oven | Hybridization Incubator | PCR | Incubator, Laboratory, Thermocycling
 

Tips for buying Laboratory Incubator, Thermocycling

  1. The thermocycling laboratory incubator instrument's throughput and reaction success are affected by some thermal cycled features, which ultimately affect time and cost savings.
  2. When determining the laboratory hybridization incubator's throughput, the reaction time is important.
  3. The overall cycling time depends largely on the temperature uniformity of the sample block or chamber. If a sample requires one minute at 95°C, this minute begins only when all the samples in the block or chamber are uniformly at 95°C.
  4. Before the samples reach the same temperature as the block or chamber, there will be some lag time, and therefore, temperature uniformity should be measured by sample temperature, not block or chamber temperature.
  5. Another important feature of the thermocycling laboratory incubator may be dwell time. If reactions are performed overnight, the length of time a device can store samples at a specific temperature becomes important.
  6. Facilities should carefully examine various cycling methods before purchasing a laboratory hybridization incubator, with respect to their effect on reaction time and outcome.
  7. The capillary air thermal cycles were introduced for the purpose of reducing the total cycling time of a reaction, by increasing the ramp rate uniformity and decreasing the hold times necessary at each step of the polymerase chain reaction cycle.
  8. A reaction is performed by thermocycling laboratory incubators in 10 to 30 minutes, while it requires three to five hours to complete a reaction for conventional heat-block cycles. One study, however, indicates that it is possible to achieve similar reaction times in a heat-block cycled by significantly reducing the hold times at each of the three cycle steps and still obtain acceptable results.
  9. To prevent evaporation, samples may require oil overlay, which can add extra time to the sample-preparation process and is often messy.
  10. Heated lids are now offered by most thermocycling laboratory incubators. These prevent evaporation and eliminate the need to add oil to the samples.
  11. Facilities may consider the adaptability of thermal cycled-to-robotics systems with the increasing degree of laboratory automation. Some laboratory hybridization incubators can be adapted fairly easily for robotics applications, which can save time and, in some cases, reduce the number of false-positive results caused by human contamination.
Read more valuable tips on the Medical Equipment Buying Guide by MedWOW >>