MedWOW / Used Medical Parts / Imaging Parts / MRI / Siemens / Mobile MAGNETOM Impact
  
 

Parts: MRI, Siemens, Mobile MAGNETOM Impact

 
Applied Filters

Manufacturer : Siemens

  Reset

Model : Mobile MAGNETOM Impact

  Reset
loupe Medical Part Finder Search for part Are you looking for a specific medical part, and you can't find it anywhere?
We can find it for you, quickly and easily!		 Go to Part Finder >>
 
Please Note: Search results for this device do not include the following devices, please select the relevant device if it is of interest to you: Mobile MRI

Looking for MRI Coils? Click Here
  • Parts (1,476)
 
 
 
 
Item Details
Seller details
Item Price (USD)
Year manufactured
Page: 1 2 3 4 5

MRI may also be referred to as :

Scanning System, Magnetic Resonance Imaging | Scanner, Nuclear Magnetic Resonance (NMR) | Open MRI Unit | Nuclear Magnetic Resonance Imaging System | Nuclear Magnetic Resonance (NMR) Unit | NMR | MRI Unit | MRI System | Magnetic Resonance Imaging System | Magnetic Resonance Imaging (MRI) Unit | Computerized MRI Tomograph | Accessible MRI Unit

If you have not found your required medical part at the list above, our suppliers can offer you the following medical parts (1,033):

 
Item Details
Actions
15MT PACKAGE ESD VA02A 1639314

Device: MRI

Manufacturer: Siemens

Model: Mobile MAGNETOM Impact

Name / Number: 15MT PACKAGE ESD VA02A / 1639314

Request a Quote

19MM HEX RATCHET 8427866

Device: MRI

Manufacturer: Siemens

Model: Mobile MAGNETOM Impact

Name / Number: 19MM HEX RATCHET / 8427866

Request a Quote

ACCESORY LABEL 4812140

Device: MRI

Manufacturer: Siemens

Model: Mobile MAGNETOM Impact

Name / Number: ACCESORY LABEL / 4812140

Request a Quote

ADAPTER 4683314

Device: MRI

Manufacturer: Siemens

Model: Mobile MAGNETOM Impact

Name / Number: ADAPTER / 4683314

Request a Quote

ADAPTER CABLE 2819790

Device: MRI

Manufacturer: Siemens

Model: Mobile MAGNETOM Impact

Name / Number: ADAPTER CABLE / 2819790

Request a Quote

ADAPTER CPL. 3144354

Device: MRI

Manufacturer: Siemens

Model: Mobile MAGNETOM Impact

Name / Number: ADAPTER CPL. / 3144354

Request a Quote

ADHESIVE TANGIT 2048759

Device: MRI

Manufacturer: Siemens

Model: Mobile MAGNETOM Impact

Name / Number: ADHESIVE TANGIT / 2048759

Request a Quote

ADJUSTING SCREW 1131403

Device: MRI

Manufacturer: Siemens

Model: Mobile MAGNETOM Impact

Name / Number: ADJUSTING SCREW / 1131403

Request a Quote

Adjustment Cushion 7098457

Device: MRI

Manufacturer: Siemens

Model: Mobile MAGNETOM Impact

Name / Number: Adjustment Cushion / 7098457

Request a Quote

AEROQUIP CONNECTION 4779153

Device: MRI

Manufacturer: Siemens

Model: Mobile MAGNETOM Impact

Name / Number: AEROQUIP CONNECTION / 4779153

Request a Quote

Page: 1 2 3 4 5

Didn't find the medical device you're looking for? Post a Buying Request
A buying lead is an excellent way to reach worldwide medical equipment sellers!
  • Fill in a simple form, giving us details about the medical device you are searching for.
  • Receive competitive quotes from global sellers that have the item you are searching for in their inventory.
  • Choose the best and most suitable quote for you!
Post a Buying Request >>
 

Tips for buying MRI Parts

MRI’s used for medical imaging contain a number of MRI parts which are assembled and connected together to form an MRI system. The MRI parts are very unique and therefore, quite different from the recognized parts used for x-ray, CT and ultrasound.

MRI uses properties of hydrogen atoms to distinguish between different tissues within the human body. The human body is composed primarily of hydrogen atoms (63%). Other elements are oxygen (26%), carbon (9%), nitrogen (1%) and relatively small amounts of phosphorous, calcium, and sodium. MRI uses a property of atoms called “spin” to distinguish differences between tissues such as muscle, fat and tendon.

With a patient in a MRI machine, and the magnet turned on, the nuclei of the hydrogen atoms are inclined to spin in one of two directions. These hydrogen atom nuclei can transition their spin orientation, or precess, to the opposite orientation. In order to spin in the other direction, a coil emits a radiofrequency (RF) that causes this transition (the frequency of energy required to make this transition is specific, and called the Larmour Frequency).

The signal that is used in creating MRI images is derived from the energy released by molecules transitioning, or precessing, from their high-energy to the low-energy state. This exchange of energy between spin states is called resonance, and as a result it is known as magnetic resonance imaging.

To understand how all MRI parts work together, it is necessary to present the main MRI parts, one by one and to explain the principal of operation:

1. The primary magnet is the largest and the most important of all of the MRI Parts. A permanent magnet powerful enough to use in a MRI would be too costly to produce and too awkward to store. The other way to make a magnet is to coil electrical wire and run a current through it, creating a magnetic field within the center of the coil. In order to create a strong enough magnetic field to perform MRI, the coils of the wire must have no resistance. Therefore they are bathed in liquid helium and a temperature close to absolute zero. The primary magnet is always the most expensive.

2. The next MRI part in line of importance is the magnetic gradient assembly:
There are three smaller magnets within an MRI machine called gradient magnets. These magnets are much smaller than the primary magnet, but they allow the magnetic field to be altered very precisely.  It is these gradient magnets that allow image “slices” of the body to be created. By altering the gradient magnets, the magnetic field can be specifically focused on a selected part of the body. The quality of the MRI image depends mainly on the quality of these magnetic MRI parts.

3. The gradient coils are driven by yet another MRI part – the gradient amplifiers assembly. This MRI part is usually heavily loaded and should be very carefully operated.

4. The next type of MRI parts to consider are the radio frequency MRI parts, more specifically, the transmitter and the receivers assembly. The transmitter outputs high power radio frequency pulses which effect the spin orientation and increase the energy state of the hydrogen nuclei. Consequently, when the spins return to their initial state, radio energy is emitted and the signal is fed into the one receiver assembly, which is a very complex and sophisticated MRI part.

5. The coupling of the exitation RF energy to the human body is by the transmitting coil(s).  The tiny MRI signal is also picked up by a coil. A coil is an MRI part specially designed for the anatomic site which is being imaged. The meaning of the word “coil” usually refers to a set of coils which feed different receivers. Each coil is a different and integral MRI part which can be switched into the system as indicated.

6. The last, but still highly significant MRI part, is the computer system:
The computer system interprets the data and creates images that display the different resonance characteristics of different tissue types. We see this as an image in various shades of grey, with some body tissues showing up darker or lighter, depending on the interaction of all of the above processes.