Used Patient Monitor - L&T -  Galaxy

Quantity:	1 available
Unit Price:	4999 4,999.00 USD

Item Description

L&T Galaxy Color Anesthesia Medical Monitor
Display:
(640 x 480 pixel) RGB Compatible with VGA monitor (CRT / TFT LCD)
Wave form field:
Configurable screen for maximum 4 wave forms (ECG, Pleth, Resp, Invasive BP or Capnography). Possible to view any 4 ECG leads, if 5-lead ECG cable is connected.
Digital field:
HR/PR, Resp, SpO2, Temp (T1, T2 or ?T) P1, P2 and NIBP (systolic, Diastolic and Mean), EtCO2 and FiCO2. On screen display of alarm limits or alarm disable status.
Trace speed:
12.5, 25 or 50 mm/sec for ECG, Invasive pressure waveform and Plethysmograph. 6.25, 12.5 or 25 mm/sec for Respiration and side Capnogram (with 14'', 640 480 pixel display)
Optical Encoder:
Rapid access to all the functions and parameter settings through single knob. Quick action hot keys for alarm mute, NIBP start/stop, IBP zero, recorder on/off, freeze and return to the main screen.
3/5 lead ECG monitoring:
Automatic detection of 3 or 5 lead ECG cable. Display of I, II, III with 3-lead cable and I, II, III, AVR, aVL, aVF and V with 5-lead cable. In built cautery and defibrillator protection.
HR range 20 to 270 bpm
Programmable arrhythmia detection (Bradycardia, Tachycardia, Asystole, Irregular and skipped beat)
Respiration:
Impedance pneumography principle.
Display of respiration waveform with respiration rate.
Respiration range: 4 to 150 bpm
User selectable aponea alarm delay: 5 - 90 sec. (steps of 5 sec.)
Capnography (CO2):
Side stream Capnography with display of CO2 waveform and digital values of EtCO2 and FiCO2.
CO2 gets priority for calculation of respiration rate.
Gain 20,40,60 and 80 mmHg. Flow rate: 140 ml/min. (+20 / -10)
CO2 measurement is possible in mmHg /Kpa / Vol%
EtCO2 range: 0 - 80 mmHg
FiCO2 range: 2 - 20 mmHg
Aponea alarm delay: 30 sec
Temperature:
Simultaneous monitoring of two temperatures. Display of T1 and T2 or ?T (if difference between T1 and T2 is less than 9.9deg C)
Temperature range: 12 deg C to 43 deg C
Pulse Oximetry:
Pitch variation with change in oxygen saturation.
SpO2 range: 0 - 100%
Display of Pulse strength, plethysmograph and SpO2 values.
Accuracy:
100 to 70% (+/- 2 digits)
69 to 50% (+/- 3 digits)
49 to 0% (unspecified)
Accuracy in neonatal monitoring 100 to 70% (+/- 3 digits)
Non-invasive Blood Pressure:
Oscillometric Principle.
Display of Systolic, Diastolic and Mean pressure.
Modes: manual, STAT (5 min), Automatic (interval 2 min to 90 min)
Range: 20 to 255 mmHg.
Accuracy: +/- 5 mmHg
Invasive Blood Pressure:
Simultaneous monitoring of 2 channels.
Display of Systolic, Diastolic and Mean pressure with respective waveform of P1 and P2. Individual and common channel zeroing. Labeling facility with automatic limits /gain/color setting.
Pressure channel overlapping option available.
IBP range: 300, 150, 60, 30, 20 and 10 mmHg
Measurement range: -40 to 300 mmHg
Alarms:
Alarm setting for all parameters.
Patient alarm: Red flashing with audio and message indicator
Equipment alarm: YELLOW flashing with audio and message indicator. Alarm auto set facility provided.
Alarm suspend: Continuous YELLOW
Auto setting of alarm for HR/PR, SpO2, P1, P2, EtCO2, FiCO2, Respiration and Temperature.
Re-alarm facility: 30 min for acknowledged alarm.
Trends:
24 hr of graphical and tabular trend for HR/PR, SpO2, P1, P2, EtCO2, FiCO2, respiration and temperature.
NIBP trend: 240 reading tabular
Alarm recall: Last 16 alarm events with date, time and message.
2hr zoom (30 sec resolution) for graphical trends with mark, record and print facility.
Recording / Printing:
Optional in-built dual channel thermal recorder for recording two waveforms (selectable) with numerical data and alarm status.
NIBP and tabular trend recording with patient information.
Direct / delayed / Continuous modes of recording.
Record on alarm facility (selectable)
Printing of ECG strip along with complete numerical data and patient information on optical ink-jet printer.
General:
Dimension: 100 H x 350 W x 300 D mm
Weight: 8.3 kg with in-built batteries, Capnography and recorder.
Interface possible with Skyline - L&T color central station.
Power Supply:
Universal power supply: 95-265V ac, 50/60 Hz
Power ratings: 40 W
Operating time: 30 min for fully charged battery (with extreme condition: NIBP 2 min interval, Capnography and recorder in use), or approx 2 hr under full charge condition (typical)
Battery type: 12V, 4Ah lead acid
Charging time: 90% charge in 12 hr for fully discharged battery

Payment Payment methods: Bank Transfer, Credit Card, Debit Card Advance payment percentage: 100% Services supplied by the seller Installation Training Packaging The item is not packed Inspection Seller allows inspection of item? Yes Available for inspection from: Immediate

All item information on this page has been supplied by seller and MedWOW cannot guarantee its accuracy.

Location: United States, Florida

Business type: Dealer

Rating: 80% (4 votes)

Poor

Excellent

Quantity available: 1

Please enter the quantity you would like to purchase: