MedWOW / used medical equipment / Imaging Equipment / Rad/Fluoro Room, Image Intensifier
 

New & Used Rad/Fluoro Room, Image Intensifier

Market Value Calculator
 
Applied Filters

Continent : North America

  Reset
Please Note: Search results for this device do not include the following devices, please select the relevant device if it is of interest to you: C-Arm,Rad/Fluoro Room, Flat Panel,Cath Lab
 
 
 
 
Item Details
Seller details
Item Price (USD)
Year manufactured
Rad/Fluoro Room, Image Intensifier SIRESKOP SX 54358 - MedWOW

9104363569

Quick Look

 
Device: Rad/Fluoro Room, Image Intensifier
Manufacturer: Siemens
Model: SIRESKOP SX
Location: United States, Ohio
Rating: 100%
75,000
This Seller accepts SafeTrade as a payment method
-
Cath Lab Advantx 218020 - MedWOW

528532512

Quick Look

 
Device: Cath Lab
Manufacturer: GE Healthcare
Model: Advantx
Location: United States, Florida
8,500
This Seller accepts SafeTrade as a payment method
1997
Cath Lab MultiDiagnost Eleva 213419 - MedWOW

273381296

Quick Look

 
Device: Cath Lab
Manufacturer: Philips
Model: MultiDiagnost Eleva
Location: United States, New Jersey
Negotiable
2004
Rad/Fluoro Room, Image Intensifier HF-1500 95596 - MedWOW

594159938

Quick Look

 
Device: Rad/Fluoro Room, Image Intensifier
Manufacturer: Eco-Ray
Model: HF-1500
Location: United States, Florida
Negotiable
2012
Rad/Fluoro Room, Image Intensifier HF-525 95597 - MedWOW

454028555

Quick Look

 
Device: Rad/Fluoro Room, Image Intensifier
Manufacturer: Eco-Ray
Model: HF-525
Location: United States, Florida
Negotiable
2012
X-ray Generator Optimus 80 204098 - MedWOW

850776974

Quick Look

 
Device: X-ray Generator
Manufacturer: Philips
Model: Optimus 80
Location: United States, Ohio
Rating: 100%
7,500
This Seller accepts SafeTrade as a payment method
1997
Rad/Fluoro Room, Image Intensifier EasyDiagnost 58487 - MedWOW

223985472

Quick Look

 
Device: Rad/Fluoro Room, Image Intensifier
Manufacturer: Philips
Model: EasyDiagnost
Location: United States, California
33,000
2001
Page: 1 2 3

Rad/Fluoro Room, Image Intensifier may also be referred to as :

Non Digital R/F Equipment | Radiographic/Fluoroscopic Table System, Image Intensifier
 

Tips for buying Rad/Fluoro Room, Image Intensifier

  1. Storage space reduction, enhanced image processing, and off-site diagnostic capabilities are some of the advantages of digital radiography over film-based radiography. Image intensifiers increase the intensity of available light in an optical system to allow use under low light conditions such as at night, to facilitate visual imaging of low-light processes such as fluorescence of materials to x-rays or gamma rays, or for conversion of non-visible light sources such as near-infrared or short wave infrared to visible.
  2. The tilting tables allow a wide range of tilting movements from -15° to +90° and have an average speed of 6°/sec. Horizontal-to-vertical tilt should average 15 sec.
  3. The non-tilting tables specify a wide range of tabletop motions but do not allow tilting angles.
  4. Digital radiographic systems generally perform upright examinations or table-based examinations, for which detector mounting is crucial.
  5. The detector is fixed in the table system in table-based units, preventing certain examinations due to patient positioning constraints. Some upright systems can be tilted to allow table based exams.
  6. Facilities should evaluate all types of examinations being performed before deciding which type of image intensifier will better suit their needs. The number and types of procedures will influence the features selected for the system.
  7. Smaller focal-spot sizes can provide better spatial resolution on film for certain studies, and options such as tomography and table tilt can increase the image intensifier system’s overall procedural capabilities.
  8. Departments handling trauma and emergency cases may prefer elevating tables because the table height can be adjusted to facilitate patient transfer from a mobile stretcher or a wheelchair.
  9. Bucky systems for both tilting and non-tilting tables should be motorized.
  10. To ensure acceptable film darkening, a three-field AEC device is recommended. Grid ratios should be 10:1 or higher. Grids with higher ratios provide higher image quality.
  11. Buyers should look into the image intensifier system’s integration into picture archiving and communication systems (PACS) already in use in the facility.
  12. Buyers should consider generator options as well; high-frequency generators need less space and often eliminate the need for high-voltage cables.
  13. To facilitate future additions to any network, compatibility with DICOM 3.0 is a requirement for all newly purchased equipment (including storage devices).
  14. Suppliers must provide DICOM conformance statements that explain in detail which information objects, service classes, and data encodings are supported by the system. The statements should be inspected by specialists, and should share the same format and vocabulary to facilitate comparisons between suppliers.
Read more valuable tips on the Medical Equipment Buying Guide by MedWOW >>