Parts: Rad/Fluoro Room, Image Intensifier, Siemens

Applied Filters

Manufacturer : Siemens

  Reset
loupe Medical Part Finder Search for part Are you looking for a specific medical part, and you can't find it anywhere?
We can find it for you, quickly and easily!		 Go to Part Finder >>
 
Please Note: Search results for this device do not include the following devices, please select the relevant device if it is of interest to you: C-Arm,Rad/Fluoro Room, Flat Panel,Cath Lab
 
 
 
 
Item Details
Seller details
Item Price (USD)
Year manufactured
Page: 1 2 3 4 5

Rad/Fluoro Room, Image Intensifier may also be referred to as :

Non Digital R/F Equipment | Radiographic/Fluoroscopic Table System, Image Intensifier

If you have not found your required medical part at the list above, our suppliers can offer you the following medical parts (18):

 
Item Details
Actions
Image Intensifier PS 1654529-X-2134

Device: Rad/Fluoro Room, Image Intensifier

Manufacturer: Siemens

Model: SIREGRAPH D3

Name / Number: Image Intensifier PS / 1654529-X-2134

Request a Quote

Image Intensifier PS 38-29-103-X2181

Device: Rad/Fluoro Room, Image Intensifier

Manufacturer: Siemens

Model: SIREGRAPH D3

Name / Number: Image Intensifier PS / 38-29-103-X2181

Request a Quote

Intensifier 40-4HDR 40-4HDR

Device: Rad/Fluoro Room, Image Intensifier

Manufacturer: Siemens

Model: SIREGRAPH D3

Name / Number: Intensifier 40-4HDR / 40-4HDR

Request a Quote

Newvicon S-4076 S-4076

Device: Rad/Fluoro Room, Image Intensifier

Manufacturer: Siemens

Model: SIREGRAPH D3

Name / Number: Newvicon S-4076 / S-4076

Request a Quote

Vidicon XQ1290RS XQ1290RS

Device: Rad/Fluoro Room, Image Intensifier

Manufacturer: Siemens

Model: SIREGRAPH D3

Name / Number: Vidicon XQ1290RS / XQ1290RS

Request a Quote

COLLIMATOR 0468223

Device: Rad/Fluoro Room, Image Intensifier

Manufacturer: Siemens

Model: SIRESKOP SX 50

Name / Number: COLLIMATOR / 0468223

Request a Quote

D100 3775256

Device: Rad/Fluoro Room, Image Intensifier

Manufacturer: Siemens

Model: SIRESKOP SX 50

Name / Number: D100 / 3775256

Request a Quote

HANDLE AXLE 3115214

Device: Rad/Fluoro Room, Image Intensifier

Manufacturer: Siemens

Model: SIRESKOP SX 50

Name / Number: HANDLE AXLE / 3115214

Request a Quote

AXIOM Footswitch 7721603

Device: Rad/Fluoro Room, Image Intensifier

Manufacturer: Siemens

Model: SIRESKOP SX

Name / Number: AXIOM Footswitch / 7721603

Request a Quote

bracket assebmly complete 2827397

Device: Rad/Fluoro Room, Image Intensifier

Manufacturer: Siemens

Model: SIRESKOP SX

Name / Number: bracket assebmly complete / 2827397

Request a Quote

Page: 1 2
 

Tips for buying Rad/Fluoro Room, Image Intensifier Parts

  1. Storage space reduction, enhanced image processing, and off-site diagnostic capabilities are some of the advantages of digital radiography over film-based radiography. Image intensifiers increase the intensity of available light in an optical system to allow use under low light conditions such as at night, to facilitate visual imaging of low-light processes such as fluorescence of materials to x-rays or gamma rays, or for conversion of non-visible light sources such as near-infrared or short wave infrared to visible.
  2. The tilting tables allow a wide range of tilting movements from -15° to +90° and have an average speed of 6°/sec. Horizontal-to-vertical tilt should average 15 sec.
  3. The non-tilting tables specify a wide range of tabletop motions but do not allow tilting angles.
  4. Digital radiographic systems generally perform upright examinations or table-based examinations, for which detector mounting is crucial.
  5. The detector is fixed in the table system in table-based units, preventing certain examinations due to patient positioning constraints. Some upright systems can be tilted to allow table based exams.
  6. Facilities should evaluate all types of examinations being performed before deciding which type of image intensifier will better suit their needs. The number and types of procedures will influence the features selected for the system.
  7. Smaller focal-spot sizes can provide better spatial resolution on film for certain studies, and options such as tomography and table tilt can increase the image intensifier system’s overall procedural capabilities.
  8. Departments handling trauma and emergency cases may prefer elevating tables because the table height can be adjusted to facilitate patient transfer from a mobile stretcher or a wheelchair.
  9. Bucky systems for both tilting and non-tilting tables should be motorized.
  10. To ensure acceptable film darkening, a three-field AEC device is recommended. Grid ratios should be 10:1 or higher. Grids with higher ratios provide higher image quality.
  11. Buyers should look into the image intensifier system’s integration into picture archiving and communication systems (PACS) already in use in the facility.
  12. Buyers should consider generator options as well; high-frequency generators need less space and often eliminate the need for high-voltage cables.
  13. To facilitate future additions to any network, compatibility with DICOM 3.0 is a requirement for all newly purchased equipment (including storage devices).
  14. Suppliers must provide DICOM conformance statements that explain in detail which information objects, service classes, and data encodings are supported by the system. The statements should be inspected by specialists, and should share the same format and vocabulary to facilitate comparisons between suppliers.
Read more valuable tips on the Medical Equipment Buying Guide by MedWOW >>