MedWOW / used medical equipment / Oncology Equipment / Radiotherapy CT Simulator
 

New & Used Radiotherapy CT Simulator

Market Value Calculator
 
Manf. Year From
Manf. Year Until
 
 
 
 
Item Details
Seller details
Item Price (USD)
Year manufactured

Quick Look

 
Device: Radiotherapy Simulator
Manufacturer: Varian
Model: Ximatron CDX
Location: United States, Georgia
30,000
This Seller accepts SafeTrade as a payment method
2002

Quick Look

 
Device: Radiotherapy CT Simulator
Manufacturer: GE Healthcare
Model: HiSpeed Xi CT Simulator
Location: Brazil, Rio de Janeiro
44,339
This Seller accepts SafeTrade as a payment method
-

Quick Look

 
Device: CT Scanner
Manufacturer: Siemens
Model: SOMATOM Emotion Duo Simulator
Location: United States, Florida
49,900
2005

Radiotherapy CT Simulator may also be referred to as :

Simulator, Radiotherapy | Radiotherapy Simulator | Radioterapy Planning System | Radiation Treatment Simulation System | Radiation Treatment Planing System | CT Simulation System
 

Tips for buying Radiotherapy CT Simulator

  1. Buyers of radiotherapy CT simulators must make sure that the patient can be positioned with respect to the beam in such a way that radiotherapy is simulated as close as possible to the patient.
  2. The radiation treatment simulation system should, therefore, have a SAD ranging from 80 to 150 cm and a source-to-image distance (SID) ranging from 80 to 200 cm.
  3. The gantry should be able to rotate ±150° above and ±180° below 100 cm SAD.
  4. To allow for proper patient positioning, the patient table should be capable of a wide range of translations and rotations.
  5. The CT simulation system should be capable of ±90° collimator rotations and image intensifier translations of ±20 cm laterally, ±20 cm longitudinally, and 60 cm radially.
  6. To enhance details and minimize the image width of the treatment area, smaller focal spot sizes of 0.6 mm or 1 mm are preferred.
  7. To meet minimum recommendations, the radiotherapy simulator should have an image x-ray field of 45 cm2 at 100 cm SAD, a 12° anode angle, and a 23 cm image intensifier with a coverage area of 70 cm2.
  8. Radiotherapy CT simulator systems should include the following standard system components: CT gantry, laser alignment, control console, and workstation. If the CT scanner is not included, the CT simulation system should be able to interface with any DICOM-compatible CT scanner.
  9. The scanner should have a large bore diameter of 70-80 cm, a 60 cm maximum field of view, and multislice capability with 0.5, 1, 2, 4, 5, and 10 mm slice widths.
  10. The radiotherapy CT simulator system should be able to reconstruct 20 images per second, digitally reconstruct radiographs in less than 1 second, and instantaneously reconstruct with beam's-eye-view.
  11. Networking and system interfacing are also important considerations when purchasing a radiotherapy CT simulator.
  12. The radiation treatment simulation system should include a shielded room for the radiotherapy CT simulator and x-ray generator, as well as separate control and treatment planning rooms. The control room should be separated from the simulator room by a large lead glass or plate-glass window.
  13. Some radiotherapy CT simulation systems may require the use of a pit for installation. This provides both an anchor for the base of the radiotherapy simulator system and a conduit for cables and wiring.
Read more valuable tips on the Medical Equipment Buying Guide by MedWOW >>