Parts: Radiotherapy Simulator, Siemens

Applied Filters

Manufacturer : Siemens

  Reset
loupe Medical Part Finder Search for part Are you looking for a specific medical part, and you can't find it anywhere?
We can find it for you, quickly and easily!		 Go to Part Finder >>
 
Please Note: Search results for this device do not include the following devices, please select the relevant device if it is of interest to you: Radiotherapy Planning System,Radiotherapy Planning and Treatment Accessories
  • Parts (6)
 
 
 
 
Item Details
Seller details
Item Price (USD)
Year manufactured

Radiotherapy Simulator may also be referred to as :

RF Radiotherapy Simulation System | Simulator, Radiotherapy | Radiotherapy Simulator | Radioterapy X-ray Planning System | Radiation Treatment Simulation System | X-ray Radiotherapy Simulator
 

Tips for buying Radiotherapy Simulator Parts

  1. Radiotherapy simulator buyers must make sure that the patient can be positioned with respect to the beam in such a way that radiotherapy is simulated as close as possible to the patient.
  2. The radiation treatment simulation system should, therefore, have a SAD ranging from 80 to 150 cm and a source-to-image distance (SID) ranging from 80 to 200 cm.
  3. The gantry should be able to rotate ±150° above and ±180° below 100 cm SAD.
  4. To allow for proper patient positioning, the patient table should be capable of a wide range of translations and rotations.
  5. The radiotherapy simulator should be capable of ±90° collimator rotations and image intensifier translations of ±20 cm laterally, ±20 cm longitudinally, and 60 cm radially.
  6. To enhance details and minimize the image width of the treatment area, smaller focal spot sizes of 0.6 mm or 1 mm are preferred.
  7. To meet minimum recommendations, the radiotherapy simulator should have an image x-ray field of 45 cm2 at 100 cm SAD, a 12° anode angle, a 23 cm image intensifier with a coverage area of 70 cm2.
  8. CT-based RF radiotherapy simulation systems should include the following standard system components: CT gantry, laser alignment, control console, and workstation. If the CT scanner is not included, the radiotherapy simulator system should be able to interface with any DICOM-compatible CT scanner.
  9. The scanner should have a large bore diameter of 70-80 cm, a 60 cm maximum field of view, and multislice capability with 0.5, 1, 2, 4, 5, and 10 mm slice widths.
  10. The radiation treatment simulation system should be able to reconstruct 20 images per second, digitally reconstruct radiographs in less than 1 second, and instantaneously reconstruct with beam's-eye-view.
  11. Networking and system interfacing are important considerations.
  12. The radiotherapy simulator suite should include a shielded room for the simulator and x-ray generator, as well as separate control and treatment planning rooms. The control room should be separated from the simulator room by a large lead glass or plate-glass window.
  13. Some radiotherapy simulator systems may require the use of a pit for installation. This provides both an anchor for the base of the simulator and a conduit for cables and wiring.
Read more valuable tips on the Medical Equipment Buying Guide by MedWOW >>